GlobalSat DG-200 Download (dg-200)

This format can...

  • read waypoints

  • read tracks

This format has the following options: erase, erase_only .

Serial download protocol for the GlobalSat DG-200™GPS data loggers.

GlobalSat DG-200

Example 3.14. Command showing DG-200 download and erase on Linux

gpsbabel -t -i dg-200,erase -o gpx /dev/ttyUSB0 outputfile.gpx


Example 3.15. Command showing DG-200 erase_only option on Linux

gpsbabel -t -i dg-200,erase_only /dev/ttyUSB0


The DG-200 provides a physical USB interface to the host computer, but internally it uses a Prolific PL-2303 chip to do this. So you must have drivers installed on your computer to recognize the PL-2303 and provide that data as a serial port to software like GPSBabel. Such software comes with the unit for Windows. Prolific provides software for Mac OS/X, but unfortunately their driver has a defect which makes it unstable with GPSBabel.

erase option

Erase device data after download.

This option erases the track log from the device after download.

erase_only option

Only erase device data, do not download anything.

Much like the erase this option erases the data in the GPS. It does not transfer data before doing so, making it much faster. This may be handy in a work flow where you want to transfer the data from the GPS, check it on a map, and then remove it from the unit.